Industrial Caster - Caster Model 9 - Plate Mount
Capacity up to 1200 pounds per caster.
These rugged cold forged casters are recommended only for manually moved applications. Model 9 is our most popular industrial caster due to its widespread use throughout industry and its low initial cost. You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions.Rollability is a function of floor surface, wheel material, capacity and the environment. If a human being has to move the weight, select the largest practical wheel diameter.
When used with mechanically powered equipment please consult us for a recommendation.

To see our Quick Change Plate, Click HERE

Need this plate size but more capacity?? Click HERE
Mounting Plate - 4" x 4 1/2"
This image is for Plate Size and Hole Placement ONLY. IT DOES NOT DEPICT THE ACTUAL PLATE.
We suggest that you do NOT drill the mounting holes to attach the casters until you receive them.
We do NOT include mounting Hardware.
You should never select on the basis of load capacity alone. There is no industry standard for load capacity ratings and they may not include a factor for abuse. Our capacity ratings are below what the casters are capable of carrying because most applications have less than perfect conditions. Please refer to the information shown at the bottom of this page. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation.

CALL US AT 800-501-3808

Features:
  • Swivel Construction - Cold forged top plate and yoke base from 1/4" steel. Swivel has double ball bearing with hardened raceways.
  • Center Pin - 5/8" diameter, rivet or bolt and nut.
  • Legs - 1/4" thick, welded outside only.
  • Axle - 1/2'' diameter hollow bolt with lock nut.
  • Wheel Bearing - B= Ball Bearings, BRNZ= Bronze, D= Delrin Bearings, PS= Precision Sealed Ball Bearings, P= Plain Bore, R= Roller Bearing.
  • Grease Fittings - for swivel and wheel bearings.
  • Finish - external metal parts are zinc plated
This caster is also available in Stainless Steel. Click HERE
  Optional Features that may be shown in the Shopping Cart:
Total Locking Brake
- TL - Locks both the Wheel from rolling AND the Swivel from turning. See increased Swivel Radius Dimensions Below.
Total Locking Brake - OFF Total Locking Brake - ON
DO NOT ORDER SWIVEL LOCK OR RACEWAY SEALS IF YOU ORDER THE TL - TOTAL LOCK BRAKE.
THE TL BRAKE WILL NOT WORK WITH EITHER THE SWIVEL LOCK OR RACEWAY SEALS.
Swivel Lock
- SL4 - Welded - Locks Swivel, NOT wheel.
Un-Locked Locked

Swivel Lock
- BSL4-FO - Locks Swivel, NOT wheel.
Foot Operated
Raceway Seals
- RS - Seals Upper and Lower Raceways from dirt and debris, improves grease retention, can reduce noise and may prolong caster life.
CAN NOT BE USED WITH
SWIVEL LOCK OPTION OR
TOTAL LOCK BRAKE
Precision Sealed Ball Bearings
- PS -Precision Sealed Ball Bearings increase rollability and are maintenance free. Available on Non-Metal Center Wheels.

Wheel Brake
- TB - Pedal on side of Wheel Locks ONLY the wheel from rolling.
Wheel Brakes are not designed
to hold on inclines.
Wheel Brake - FCB - Face Contact Brake
Wheel Brakes are not designed to hold on inclines.
Not available on V-Groove Wheels.
Also Available:    Floor Truck Locks

Click here.		 Floor Truck Locks are used to hold equipment in place on level floors only. When you step on the activation pedal, a rubber pad comes in contact with the floor providing friction so that the equipment will not move. Floor Locks are not designed to lift the equipment. Install between swivel casters. Release rubber pad by stepping on either of the Release Pedals.

These floor locks are also available in stainless steel. Please call for information.

Caster Photos are with 6" Wheels - 4" - 5" - 6"and 8" are available.

Green
Polyurethane on Iron
Swivel Caster
Red
Polyurethane on Iron
Swivel Caster
Polyurethane on Iron
Blue Crown Tread
Swivel Caster
Polyurethane on Iron
Red Crown Tread
Swivel Caster
Polyurethane on
Glass-Filled Nylon
Swivel Caster

Blue/Black
Polyurethane on
Polyolefin
Swivel Caster
Maroon/Gray
Polyurethane on
Polyolefin
Swivel Caster
Yellow Polyurethane
on Aluminum
Crown Tread
Swivel Caster
Green Polyurethane
on Aluminum
Crown Tread
Swivel Caster
Orange Polyurethane
on Aluminum
Crown Tread
Swivel Caster

Extra Thick
Green Polyurethane
on Aluminum
Swivel Caster


All Polyurethane
Swivel Caster


All Polyurethane
Swivel Caster

Super Cushion
Rubber Swivel Caster
Pneumatic Alternative

Gray Soft Rubber
Flat Tread
Swivel Caster

Gray Soft Rubber
Crown Tread
Swivel Caster
Neoprene Rubber
Slight Crown Tread
Swivel Caster
High Capacity Rubber
Flat Tread
Swivel Caster
Conventional
Rubber on Iron
Swivel Caster

Polyolefin
Swivel Caster


Extra Heavy Duty Polyolefin
Swivel Caster

White Nylon
Swivel Caster

Black Nylon
Swivel Caster

Phenolic
Swivel Caster
High Temperature
Glass - Nylon
Swivel Caster

High Temperature
Phenolic
Swivel Caster
High Temperature
Oven Epoxy Wheel
Swivel Caster

Ductile Steel
Swivel Caster
Slight Crown
Ductile Steel
Swivel Caster

Gray Iron
Swivel Caster
We do NOT include mounting Hardware.
Click on the Part Numbers for Pricing, Options and to ORDER.
If you have a LARGE quantity requirement, Please Email Sales@CasterCity.com
Caster
Wheel
Diam.		 Tread
Width		 Click here
to compare
wheel materials.		 Std
Brg
Type
Max
Cap.
Each
Caster
lbs.
Click Part Numbers Below
For Price and to Order

Approx
Swivel
Weight
lbs.		 Approx
Swivel
Radius
without
TL
Brake		 Overall
Height
Wheel Tread Material
Click to see Wheel		 Swivel Caster Rigid Caster
Buy it Now Buy it Now
3 1/4" 2" Polyurethane on Iron - Green R 600 9PY3.25x2-S 9PY3.25x2-R 6 3 1/2" 4 1/4"
Phenolic R 700 9TH3.25x2-S 9TH3.25x2-R 5
4" 2" Conventional Moldon Rubber R 250 9MR4x2-S 9MR4x2-R 6 1/2 3 1/2"


6 1/2" with
TL Brake
See Below		 5 5/8"
Gray Soft Rubber, Flat R 250 9RF4x2-S 9RF4x2-R 5
Neoprene Rubber PS 300 9EN4x2PS-S 9EN4x2PS-R 5
High Capacity Rubber B 300 9RH4x2-S 9RH4x2-R 5
Polyurethane on Iron - Green R 600 9PY4x2-S 9PY4x2-R 6 1/2
Polyurethane on Iron - Red R 600 9PYR4x2-S 9PYR4x2-R 6 1/2
Blue Polyurethane on Iron - Slight Crown R 700 9PYC4x2-S 9PYC4x2-R 7 1/2
Red Polyurethane on Iron - Crown PS 700 9PCI4x2PS-S 9PCI4x2PS-R 7 1/2
85A Yellow Polyurethane on Aluminum - Crown PS 600 9UXY4x2-S 9UXY4x2-R 5
90A Orange Polyurethane on Aluminum - Crown PS 700 9UAO4x2-S 9UAO4x2-R 5
Polyurethane - Blue/Black R 400 9UP4x2-S 9UP4x2-R 6
Polyurethane - Maroon/Gray R 400 9MG4x2-S 9MG4x2-R 6
Poly on Glass-Filled Nylon R 700 9UG4x2-S 9UG4x2-R 6
All Polyurethane Blue R 700 9AP4x2-S 9AP4x2-R 5
All Polyurethane Gray PS 900 9HU4x2-S 9HU4x2-R 5
Polyolefin ( Black ) R 500 9PB4x2-S 9PB4x2-R 4 1/2
Polyolefin - High Capacity PS 800 9RK4x2PS-S 9RK4x2PS-R 51/2
Nylon ( White ) R 800 9NY4x2-S 9NY4x2-R 51/2
Nylon ( Black ) PS 800 9MK4x2PS-S 9MK4x2PS-R 51/2
Phenolic R 800 9TM4x2-S 9TM4x2-R 5 1/4
Gray Iron R 500 9CL4x2-S 9CL4x2-R 8 1/2
Ductile Steel - Flat R 900 9DS4x2-S 9DS4x2-R 9
Ductile Steel - Slight Crown R 900 9DSC4x2-S 9DSC4x2-R 9
Ductile Steel - Slight Crown BRNZ 900 9DSC4x2BRNZ-S 9DSC4x2BRNZ-R 9
V-Groove Iron R 500 9VL4x2-S 9VL4x2-R 6 3/4
V-Groove Ductile Steel R 900 9VS4x2-S 9VS4x2-R 7 3/4
V-Groove Glass Filled Nylon PS 500 9VN4x2PS-S 9VN4x2PS-R 5 1/4
High Temp Glass Filled Nylon P 600 9NP4x2-S 9NP4x2-R 4 1/2
High Temp Phenolic - Fiberglass R 600 9TP4x2-S 9TP4x2-R 4 1/2
High Temp Phenolic - Fiberglass BRNZ 600 9TP4x2BRNZ-S 9TP4x2BRNZ-R 4 1/2
High Temp "OV" Oven Epoxy R 900 9OV4x2-S 9OV4x2-R 4 1/2
High Temp "OV" Oven Epoxy BRNZ 900 9OV4x2BRNZ-S 9OV4x2BRNZ-R 4 1/2
Frame Only - No Wheel NA NA 9YA4x2-S 9YA4x2-R 3 1/2 NA NA
5" 2" Conventional Moldon Rubber R 300 9MR5x2-S 9MR5x2-R 7 1/2 4 1/4"


6 1/2" with
TL Brake
See Below		 6 1/2"
Gray Soft Rubber, Flat R 300 9RF5x2-S 9RF5x2-R 6
Neoprene Rubber PS 350 9EN5x2PS-S 9EN5x2PS-R 6
High Capacity Rubber B 350 9RH5x2-S 9RH5x2-R 6
Polyurethane on Iron - Green R 800 9PY5x2-S 9PY5x2-R 7 3/4
Polyurethane on Iron - Red R 800 9PYR5x2-S 9PYR5x2-R 7 3/4
Blue Polyurethane on Iron - Slight Crown R 1000 9PYC5x2-S 9PYC5x2-R 8 1/2
Red Polyurethane on Iron - Crown PS 800 9PCI5x2PS-S 9PCI5x2PS-R 8 1/2
85A Yellow Polyurethane on Aluminum - Crown PS 700 9UXY5x2-S 9UXY5x2-R 6
90A Orange Polyurethane on Aluminum - Crown PS 800 9UAO5x2-S 9UAO5x2-R 6
Polyurethane - Blue/Black R 500 9UP5x2-S 9UP5x2-R 7
Polyurethane - Maroon/Gray R 500 9MG5x2-S 9MG5x2-R 7
Poly on Glass-Filled Nylon R 800 9UG5x2-S 9UG5x2-R 7
All Polyurethane Blue R 800 9AP5x2-S 9AP5x2-R 5 1/2
All Polyurethane Gray PS 900 9HU5x2-S 9HU5x2-R 6
Polyolefin ( Black ) R 600 9PB5x2-S 9PB5x2-R 5
Polyolefin - High Capacity PS 900 9RK5x2PS-S 9RK5x2PS-R 6
Nylon ( White ) R 900 9NY5x2-S 9NY5x2-R 6
Nylon ( Black ) PS 900 9MK5x2PS-S 9MK5x2PS-R 6
Phenolic R 800 9TM5x2-S 9TM5x2-R 5 3/4
Gray Iron R 500 9CL5x2-S 9CL5x2-R 9 3/4
Ductile Steel R 900 9DS5x2-S 9DS5x2-R 10
Ductile Steel - Slight Crown R 900 9DSC5x2-S 9DSC5x2-R 10
Ductile Steel - Slight Crown BRNZ 900 9DSC5x2BRNZ-S 9DSC5x2BRNZ-R 10
High Temp Glass Filled Nylon P 750 9NP5x2-S 9NP5x2-R 5
High Temp Phenolic - Fiberglass R 750 9TP5x2-S 9TP5x2-R 5
High Temp Phenolic - Fiberglass BRNZ 750 9TP5x2BRNZ-S 9TP5x2BRNZ-R 5
High Temp "OV" Oven Epoxy R 900 9OV5x2-S 9OV5x2-R 5
High Temp "OV" Oven Epoxy BRNZ 900 9OV5x2BRNZ-S 9OV5x2BRNZ-R 5
Frame Only - No Wheel NA NA 9YA5x2-S 9YA5x2-R 3 3/4 NA NA
6" 2" SUPER CUSHION Rubber B 350 9CB6x2-S 9CB6x2-R 7 4 7/8"


6 1/2" with
TL Brake
See Below		 7 1/2"
Conventional Moldon Rubber R 400 9MR6x2-S 9MR6x2-R 8 3/4
Gray Soft Rubber, Flat R 400 9RF6x2-S 9RF6x2-R 7
Gray Soft Rubber, Crowned R 350 9RD6x2-S 9RD6x2-R 6 1/2
Neoprene Rubber PS 400 9EN6x2PS-S 9EN6x2PS-R 7
High Capacity Rubber B 450 9RH6x2-S 9RH6x2-R 7
Polyurethane on Iron - Green R 900 9PY6x2-S 9PY6x2-R 9 1/4
Polyurethane on Iron - Red R 900 9PYR6x2-S 9PYR6x2-R 9 1/4
Blue Polyurethane on Iron - Slight Crown PS 1200 9PYC6x2-S 9PYC6x2-R 10 3/4
Red Polyurethane on Iron - Crown PS 900 9PCI6x2PS-S 9PCI6x2PS-R 10 3/4
85A Yellow Polyurethane on Aluminum - Crown PS 800 9UXY6x2-S 9UXY6x2-R 6
90A Orange Polyurethane on Aluminum - Crown PS 900 9UAO6x2-S 9UAO6x2-R 6
95A Green Polyurethane on Aluminum - Crown PS 900 9UAC6x2-S 9UAC6x2-R 6
Extra Thick Polyurethane on Aluminum PS 900 9CP6x2PS-S 9CP6x2PS-R 8
Polyurethane - Blue/Black R 600 9UP6x2-S 9UP6x2-R 8
Polyurethane - Maroon/Gray R 600 9MG6x2-S 9MG6x2-R 8
Poly on Glass-Filled Nylon R 900 9UG6x2-S 9UG6x2-R 8
All Polyurethane Blue R 900 9AP6x2-S 9AP6x2-R 6 1/2
All Polyurethane Gray PS 900 9HU6x2-S 9HU6x2-R 7
Polyolefin ( Black ) R 700 9PB6x2-S 9PB6x2-R 6
Polyolefin - High Capacity PS 900 9RK6x2PS-S 9RK6x2PS-R 7
Nylon ( White ) R 900 9NY6x2-S 9NY6x2-R 7
Nylon ( Black ) PS 900 9MK6x2PS-S 9MK6x2PS-R 7
Phenolic R 900 9TM6x2-S 9TM6x2-R 6 1/2
Gray Iron R 500 9CL6x2-S 9CL6x2-R 11 1/4
Ductile Steel R 900 9DS6x2-S 9DS6x2-R 11
Ductile Steel - Slight Crown R 900 9DSC6x2-S 9DSC6x2-R 11
Ductile Steel - Slight Crown BRNZ 900 9DSC6x2BRNZ-S 9DSC6x2BRNZ-R 11
V-Groove Iron R 500 9VL6x2-S 9VL6x2-R 9 1/2
V-Groove Ductile Steel R 900 9VS6x2-S 9VS6x2-R 11
High Temp Glass Filled Nylon P 900 9NP6x2-S 9NP6x2-R 6
High Temp Phenolic - Fiberglass R 900 9TP6x2-S 9TP6x2-R 6
High Temp Phenolic - Fiberglass BRNZ 900 9TP6x2BRNZ-S 9TP6x2BRNZ-R 6
High Temp "OV" Oven Epoxy R 900 9OV6x2-S 9OV6x2-R 6
High Temp "OV" Oven Epoxy BRNZ 900 9OV6x2BRNZ-S 9OV6x2BRNZ-R 6
Frame Only - No Wheel NA NA 9YA6x2-S 9YA6x2-R 5 NA NA
8" 2" SUPER CUSHION Rubber B 450 9CB8x2-S 9CB8x2-R 9 6 1/4"


7 1/2" with
TL Brake
See Below		 9 1/2"
Conventional Moldon Rubber R 500 9MR8x2-S 9MR8x2-R 11
Gray Soft Rubber, Flat R 500 9RF8x2-S 9RF8x2-R 8
Gray Soft Rubber, Crowned R 450 9RD8x2-S 9RD8x2-R 7 1/4
Neoprene Rubber PS 500 9EN8x2PS-S 9EN8x2PS-R 8
High Capacity Rubber B 550 9RH8x2-S 9RH8x2-R 8
Polyurethane on Iron - Green R 900 9PY8x2-S 9PY8x2-R 12
Polyurethane on Iron - Red R 900 9PYR8x2-S 9PYR8x2-R 12
Blue Polyurethane on Iron - Slight Crown PS 1200 9PYC8x2-S 9PYC8x2-R 14
Red Polyurethane on Iron - Crown PS 900 9PCI8x2PS-S 9PCI8x2PS-R 14
85A Yellow Polyurethane on Aluminum - Crown PS 900 9UXY8x2-S 9UXY8x2-R 7
90A Orange Polyurethane on Aluminum - Crown PS 900 9UAO8x2-S 9UAO8x2-R 7
95A Green Polyurethane on Aluminum - Crown PS 900 9UAC8x2-S 9UAC8x2-R 7
Extra Thick Polyurethane on Aluminum PS 900 9CP8x2PS-S 9CP8x2PS-R 9
Polyurethane - Blue/Black R 700 9UP8x2-S 9UP8x2-R 8
Polyurethane - Maroon/Gray R 700 9MG8x2-S 9MG8x2-R 8
Poly on Glass-Filled Nylon R 900 9UG8x2-S 9UG8x2-R 8
All Polyurethane Blue R 900 9AP8x2-S 9AP8x2-R 8
All Polyurethane Gray PS 900 9HU8x2-S 9HU8x2-R 9
Polyolefin ( Black ) R 800 9PB8x2-S 9PB8x2-R 7 1/2
Polyolefin - High Capacity PS 900 9RK8x2PS-S 9RK8x2PS-R 8 1/2
Nylon ( White ) R 900 9NY8x2-S 9NY8x2-R 8 1/2
Nylon ( Black ) PS 900 9MK8x2PS-S 9MK8x2PS-R 8 1/2
Phenolic R 900 9TM8x2-S 9TM8x2-R 8
Gray Iron R 500 9CL8x2-S 9CL8x2-R 12 1/2
Ductile Steel R 900 9DS8x2-S 9DS8x2-R 12
Ductile Steel - Slight Crown R 900 9DSC8x2-S 9DSC8x2-R 12
Ductile Steel - Slight Crown BRNZ 900 9DSC8x2BRNZ-S 9DSC8x2BRNZ-R 12
High Temp Glass Filled Nylon P 900 9NP8x2-S 9NP8x2-R 7 1/2
High Temp Phenolic - Fiberglass R 900 9TP8x2-S 9TP8x2-R 7 1/2
High Temp Phenolic - Fiberglass BRNZ 900 9TP8x2BRNZ-S 9TP8x2BRNZ-R 7 1/2
High Temp "OV" Oven Epoxy R 900 9OV8x2-S 9OV8x2-R 7 1/2
High Temp "OV" Oven Epoxy BRNZ 900 9OV8x2BRNZ-S 9OV8x2BRNZ-R 7 1/2
Frame Only - No Wheel NA NA 9YA8x2-S 9YA8x2-R 6 NA NA
Caster Model 9 Quick Change Plate
Will ONLY fit the casters shown on this page WITHOUT
the ( Total Lock ) Brake Option!
Will NOT WORK with Pneumatic or Foam Filled Pneumatic casters
Zinc Plated quick change plate that bolts onto your equipment to enable casters to be easily and quickly installed or replaced (changed) without using tools.
Quick Change Plate - Zinc Plated
Click for Prices and to Order   9QCP-01-ZN
Caster Model 9 - Caster Pad
Will ONLY fit the casters shown on this page but WILL NOT FIT if you order the TL ( Total Lock ) Brake Option!
Unplated caster pad gets welded onto your equipment. It enables casters to be easily and quickly installed or replaced. For use with casters having a 4" x 4 1/2" Mounting Plate. Includes locking bolt installed as shown.
Caster Pad - Unplated
Click for Prices and to Order   D9CP-01-NO

Deduct 1 lb. for weight of rigid caster.
Swivel Radius Information:
The Total Locking Option ( TL ) changes the Swivel Radius of the caster to the following;
4", 5" and 6" diameter wheels = 6 1/2" Swivel Radius
8" diameter wheel = 7 1/2" Swivel Radius

Maximum Capacity under ideal conditions.
If your application exceeds 40 minutes at the maximum temperature rating for these wheels contact us at 800-501-3808 for a recommendation.
You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these casters are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application. If a human being has to move the weight, select the largest practical wheel diameter.

If a caster failure occurs it is almost always because of misuse or abuse. It has been very rare that a product failed because of faulty material or poor workmanship. The following are examples of things that we do NOT want you to do:

1. Dragging the wheel sideways.
2. Shock or Impact caused by dropping the load instead of setting it down on the castered equipment.
3. Improper Installation such as:
  A. Rigid casters not installed parallel to one another.
  B. Swivel casters not installed parallel to the floor.
  C. Using less than 4 bolts to attach the mounting plate.
  D. Distortion of the swivel bearing when attaching the mounting plate due to welding improperly.
4. Exceeding the rated capacity of the wheel or caster.
5. Exceeding a rolling speed of 3 MPH.
6. The build up of heat caused by continuous operation causing tire separation.
Photos & graphics are for informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary unless specified. If wheel color is important, please contact us for current inventory.