|
|
Stainless Steel Caster - Caster Model 9 - Plate
Mount |
|
Capacity up to 1200
pounds per caster. Stainless steel casters are ideal for use in a wet
or corrosive environment. Typical applications include Pharmaceutical
Laboratories and Food Processing Plants.
Features:
- Swivel Construction - cold forged top plate
and yoke base from 1/4" Stainless Steel.
- Legs - 1/4" thick, welded inside and
out.
- Axle - 1/2'' diameter hollow bolt with lock
nut.
- Standard Wheel Bearing:
D= Delrin
Bearings, P= Plain Bore, SPS= Stainless Precision Sealed Ball Bearings,
SSR= Stainless Steel Roller Bearing
- Grease Fittings - for swivel and wheel
bearings.
|
Mounting Plate - 4" x 4
1/2" |
This image is for Plate Size and
Hole Placement ONLY. IT DOES NOT DEPICT THE ACTUAL PLATE. |
|
We suggest that you do NOT drill the mounting holes to
attach the casters until you receive them. |
We do NOT include mounting
Hardware. |
|
All stainless steel is NOT necessarily
non-magnetic. Click Here |
You
should never select on the basis of load capacity alone. There is no industry
standard for load capacity ratings and they may not include a factor for abuse.
Our capacity ratings are below what the casters are capable of carrying because
most applications have less than perfect conditions. Please refer to the
information shown at the bottom of this page. If you have any doubt as to which
wheel or caster is the BEST choice for your application contact us for a
recommendation.
CALL US AT 800-501-3808 |
|
|
|
Optional Features will be shown in the Shopping Cart:
|
|
Swivel Lock - SL4 -
Welded - Locks Swivel, NOT wheel. |
|
|
Un-Locked |
Locked |
|
Wheel Brake - TB -
Pedal on side of Wheel Locks ONLY the wheel from rolling. |
|
Wheel Brakes are
not designed to hold on inclines. |
|
Raceway Seals - RS - Seals Upper and Lower
Raceways from dirt and debris, improves grease retention, can reduce noise and
may prolong caster life. |
|
CAN
NOT BE USED WITH SWIVEL LOCK OPTION |
|
|
Optional Wheel Bearings PS - Non-Stainless Sealed
Precision Ball Bearings SPS - Stainless Sealed Precision Ball
Bearings SSR - Stainless Roller Bearing |
|
|
For a
Stainless caster with a Solid Stainless Steel Wheel - Click Here
|
Caster Photos are with 6" Wheels - 4" - 5" -
6"and 8" are available. |
Gray Soft Rubber Swivel Caster |
All Polyurethane Swivel
Caster |
Polyurethane on Polyolefin
Blue/Black |
Polyurethane on Polyolefin
Maroon/Gray |
Polyurethane on Glass Filled Nylon Swivel
Caster |
Polyolefin Swivel Caster |
Extra Heavy Duty Polyolefin Swivel Caster |
White Nylon Swivel Caster |
Black Nylon Swivel Caster |
Phenolic Swivel Caster |
High Temperature Glass - Nylon Swivel
Caster |
High Temperature Phenolic Swivel Caster
|
Extra Heavy Duty
Polyolefin Rigid Caster |
White Nylon Rigid
Caster |
V Groove Glass Filled Nylon Rigid
Caster |
|
We do NOT include mounting
Hardware. |
Click on the Part Numbers for Pricing, Options and to
ORDER. |
If you have a LARGE quantity requirement, Please Email Sales@CasterCity.com |
|
Deduct 1 lb. for weight of rigid caster.
|
Swivel
Radius Information: The Total Locking Option ( TL ) changes the
Swivel Radius of the caster to the following; 4", 5" and 6" diameter
wheels = 6 1/2" Swivel Radius 8" diameter wheel = 7
1/2" Swivel Radius
|
Maximum Capacity under ideal
conditions. If your application exceeds 40 minutes at the
maximum temperature rating for these wheels contact us at 800-501-3808 for a
recommendation.
|
You
should never select on the basis of load capacity alone. Capacity ratings do
not take into account the effort required to manually move a load. Capacity
ratings are based on manual operation under ideal conditions. If these casters
are going to be moved by mechanically powered equipment, consult us for a
reduced capacity rating based on your application. If a human being has to move
the weight, select the largest practical wheel
diameter.
If a caster failure occurs
it is almost always because of misuse or abuse. It has been very rare that a
product failed because of faulty material or poor workmanship. The following
are examples of things that we do NOT want you to
do:
1. Dragging the wheel sideways. |
2. Shock or Impact caused by dropping the load instead of
setting it down on the castered equipment. |
3. Improper Installation such as: |
|
A.
Rigid casters not installed parallel to one another. |
|
B.
Swivel casters not installed parallel to the floor. |
|
C. Using less than 4 bolts to
attach the mounting plate. |
|
D.
Distortion of the swivel bearing when attaching the mounting plate due to
welding improperly. |
4. Exceeding the rated capacity of the wheel or
caster. |
5. Exceeding a rolling speed of 3 MPH. |
6. The build up of heat caused by continuous operation
causing tire separation. |
|
|
Photos & graphics are for
informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary
unless specified. If wheel color is important, please contact us for current
inventory. |
|
|
|