|
|
Phenolic caster wheels are
made from macerated canvas mixed with phenolic resin, and molded under high
pressure and temperature. Its hardness is comparable to polished maple
flooring. Phenolic caster wheels are recommended for smooth concrete and can be
used for storage (standing) loads without permanent set. These caster wheels
are highly resistant to oil, grease, gasoline and mild acids. It is not
recommended for wet applications where the wheel will be in standing water.
They are affected in various degrees by strong acids and some alkaline
solutions. Temperature range is -40° to +250° F, with intermittent use
up to 300° F. Phenolic caster wheels will carry loads as great as the same
size iron wheel. The wheel material may chip or cut from contact with steel
plate or from rolling over steel parts on the floor. The wheel tread may show
wear from repeated travel over rough surfaces. Floor wear is slight except
where floors are already starting to deteriorate. These wheels can be made with
a laminated unmacerated tread to provide 25% more capacity and greater chip
resistance.
R = Roller Bearing, D = Delrin Bearings, P = Plain Bore, PS
= Precision Sealed Ball Bearings
|
IS THIS THE RIGHT WHEEL FOR YOUR
APPLICATION?? CLICK TO COMPARE WITH OTHER WHEELS.
|
|
|
6" x 2" Phenolic Wheel Shown with Roller
Bearings TM - "Recessed Sides" |
6" x 2" Phenolic Wheel Shown with Roller
Bearings TH - "Straight Sides" |
6" x 3" Phenolic Wheel Shown with Roller
Bearings TH - "Straight Sides" |
8" x 3" Phenolic Wheel Shown with Roller
Bearings TM - "Recessed Sides" |
5" x 1 1/4" Phenolic Wheel Shown
with Plain Bore TM - "Recessed Sides" |
|
WHEELS
ONLY |
We do NOT
include mounting Hardware. |
Click on the Part Numbers for Pricing, Options and to
ORDER. |
|
Wheel Diam. |
Tread Width |
Hub Length |
Capacity Lbs. |
|
Click
Part Numbers Below For Price and to Order |
|
Bearing I.D. / Type
|
I.D.
with Spanner. |
Approx. Wt. |
Wheel ONLY Part Number |
3" |
1 1/4" |
1 3/8" |
300 |
TM3x1.25P |
1/2" P |
3/8" |
3/4 |
3
1/4" |
2" |
2 7/16" |
700 |
TH3.25x2R |
3/4" R |
1/2" |
1 1/2 |
4" |
1 1/4" |
1 3/8" |
300 |
TM4x1.25P |
1/2" P |
3/8" |
1 |
1 1/2" |
1 5/8" |
400 |
TM4x1.50P |
1 1/2 |
2" |
2 7/16" |
800 |
TM4x2PS |
1/2" PS |
N/A |
1 3/4 |
TM4x2R |
3/4" R |
1/2" |
TM4x2D |
3/4" D |
1000 |
TH4x2R |
3/4" R |
2 |
5" |
1 1/4" |
1 3/8" |
300 |
TM5x1.25P |
1/2" P |
3/8" |
1 1/2 |
1 1/2" |
1 5/8" |
450 |
TM5x1.50P |
1/2" P |
1 3/4 |
2" |
2 7/16" |
1000 |
TM5x2PS |
1/2" PS |
N/A |
2 1/4 |
TM5x2R |
3/4" R |
1/2" |
TM5x2D |
3/4" D |
1200 |
TH5x2R |
3/4" R |
2 1/2 |
6" |
2" |
2 7/16" |
1200 |
TM6x2PS |
1/2" PS |
N/A |
2 3/4 |
TM6x2R |
3/4" R |
1/2" |
TM6x2D |
3/4" D |
1500 |
TH6x2R |
3/4" R |
3 |
2 1/2" |
2 3/4" |
1600 |
TH6x2.50N |
1" R |
3/4" |
4 1/4 |
3" |
3 1/4" |
2000 |
TH6x3R |
1" R |
5 1/2 |
8" |
2" |
2 7/16" |
1400 |
TM8x2PS |
1/2" PS |
N/A |
4 |
TM8x2R |
3/4" R |
1/2" |
TM8x2D |
3/4" D |
2 1/2" |
2 3/4" |
1800 |
TM8x2.50N |
1" R |
3/4" |
6 |
3" |
3 1/4" |
2500 |
TM8x3R |
1" R |
7 1/2 |
10" |
2 1/2" |
2 3/4" |
1800 |
TM10x2.50N |
1" R |
3/4" |
7 1/2 |
3" |
3 1/4" |
2500 |
TM10x3R |
1" R |
10 |
12" |
2 1/2" |
2 3/4" |
1800 |
TM12x2.50N |
1" R |
3/4" |
11 1/2 |
3" |
3 1/4" |
3000 |
TM12x3R |
1" R |
13 |
|
"TM" indicates caster
wheels with RECESSED SIDES. "TH"
indicates caster wheels with STRAIGHT
SIDES.
|
You
should never select on the basis of load capacity alone. Capacity ratings do
not take into account the effort required to manually move a load. Capacity
ratings are based on manual operation under ideal conditions. If these wheels
are going to be moved by mechanically powered equipment, consult us for a
reduced capacity rating based on your application
|
|
Photos & graphics are for
informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary
unless specified. If wheel color is important, please contact us for current
inventory. |
|
|
|