|
|
High Temperature Caster Wheels |
|
If your application exceeds 30 minutes at the maximum temperature
rating for these wheels contact us at 800-501-3808 for a recomendation for your
specific application. All load capacities are based on ideal operating
conditions. Consult us for a reduced load capacity based on the conditions of
your specific application.
High Temperature Phenolic
Wheels have a prefix "TP" in the part number and are made with glass fiber.
They are best suited for dry heat applications such as powder coating, dry
heat bakery ovens and dry heat autoclaves. Temperature Rating: Up to 475° F
for 30 minutes MAXIMUM continuous
operation. Then allow to cool to room temperature. If used above 475° F for
more than 30 minutes continuous operation it will reduce the life of the
wheel.
High Temperature Wheels with a prefix "NP" in the part number
are made of nylon mixed with glass fiber. They perform best in moist heat
applications such as in smokehouses, moist heat bakery and autoclave
applications and around water and steam. Temperature Rating: Up to 425° F
for 30 minutes MAXIMUM continuous
operation. Then allow to cool to room temperature. If used above 425° for
more than 30 minutes continuous operation it will reduce the life of the wheel.
High Temperature Glass-Filled Nylon wheels are not recommended for dry heat
applications because once the moisture content of the wheel gets to zero, the
wheel will shatter.
High temperature wheels with a prefix of "OV"
are made of Epoxy mixed with glass fiber. They perform best in both moist
heat and dry heat appllications. Temperature Range: UP to 460 degrees
Fahrenheit for 60 minutes MAXIMUM
continuous operation.
The High Temperature Phenolic Wheels ( prefix "TP"
) , the High Temperature Glass-Filled Nylon wheels ( prefix "NP" ), and the
High Temperture "OV" Epoxy Resin Wheels have a hard surface and should be used
on smooth floor surfaces. If the floors are rough or if there are obstructions
which will impact these wheels it will reduce the service life of the wheels.
In any high temperature application it is always best to shield High
Temperature Wheels from a direct heat intake source. Consult us for a load capacity rating in your
application. We will need the
following information: Maximum Temperature and for how long? Maximum load on
each caster? Is your application wet or dry?
The above wheels
with 1 1/4" and 1 1/2" tread width have plain bores and a bushing(s) to fit
onto a 3/8" axle. Wheels with a 2" tread width have a 3/4" ID Roller Bearing or
Bronze Bearing and come with a steel spanner bushing to fit onto a 1/2" axle.
Some sizes are available with a 3/4" Plain Bore upon
request.
Sterilizer wheels have a prefix "HTR" and are made with an
engineered rubber tire bonded to a stainless center. They provide quiet
rolling, a cushion ride, and floor protection. These wheels were designed for
use on equipment in hospital and laboratory sterilizers and autoclaves. They
are also used in other high temperature applications where a cushion ride is
needed to protect product being moved. Examples include commercial bakeries and
aerospace plants. These wheels are never to be used above 300 degrees
Fahrenheit. They should not be used for more than 1 hour continuous. Load
capacity rating for the 4 x 1.50 wheel is 200 Lbs, and for the 5 x 2 wheel is
300 Lbs. under ideal operating conditions. The 4 x 1.50 wheel has stainless
ball bearings and comes with a bushing to fit a 3/8" axle. The 5 x 2 wheel has
a bronze bearing and fits on a 1/2" axle. |
|
|
NP High Temperature
Glass Filled Nylon 4" x 1 1/4" with Top Hat Spanner Bushings |
NP High
Temperature Glass Filled Nylon 6" x 2" with Roller Bearing |
TP High Temperature Phenolic ( Fiberglass )
4" x 1 1/4" with Top Hat Spanner Bushings |
HTR Sterilizer High
Temperature Rubber 4" x 1 1/2" with Ball Bearings & Spanner |
OV High Temperature Epoxy Resin 6" x 2"
with Roller Bearing |
|
We do NOT include mounting
Hardware. |
Click on the Part Numbers for Pricing, Options and to
ORDER. |
|
|
Maximum Capacity under ideal
conditions. If your application exceeds 40 minutes at the
maximum temperature rating for these wheels contact us at 800-501-3808 for a
recommendation.
|
You should never
select on the basis of load capacity alone. Capacity ratings do not take into
account the effort required to manually move a load. Capacity ratings are based
on manual operation under ideal conditions. If these wheels are going to be
moved by mechanically powered equipment, consult us for a reduced capacity
rating based on your application.
|
|
Photos & graphics are for
informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary
unless specified. If wheel color is important, please contact us for current
inventory. |
|
|
|