Forged Steel & Ductile Steel Caster Wheels
Where loads are too heavy for floor protective wheels, or where unusually severe service factors are present, forged steel & Ductile steel caster wheels will do the job. Usually in these applications the user will not consider floor wear as too great a penalty considering the work that is being done. Forged steel caster wheels will damage most factory floors, and thus are generally used on steel plate, in channel, or as V-groove wheels rolling on angle iron track.

Forged steel & Ductile steel caster wheels have high ductility and tensile strength, and thus can absorb shock or impact without failure. These solid (spokeless) wheels are unbreakable in normal service. Their load ratings are limited by bearing capacity only.

Machined Steel caster wheels are machined from hot-rolled solid steel bar. They are highly resistant to shock loads and offer high capacity, durability and performance. Choice of a 3/4" ID Roller Bearing or a 3/4" ID Bronze Bearing. Both wheels are furnished with a 1/2" ID Spanner Bushing to fit on a 1/2" caster axle.

These steel wheels are capable of temperatures up to 700° F depending upon the application. At temperatures above 400° F continuous, steel roller bearings and spanner bushings can start to anneal. In applications where temperatures are above 400° F, please consult our engineering dept. at 800 - 501 - 3808.

Part Number Prefex: DS = Ductile Steel - FS = Forged Steel - MS = Machined Steel
IS THIS THE RIGHT WHEEL FOR YOUR APPLICATION?? CLICK TO COMPARE WITH OTHER WHEELS.

4" Machined Solid Steel
Bronze Bearing
4" Machined Solid Steel
Roller Bearing


6" x 3" Forged Steel
Roller Bearing
10" x 4" Forged Steel
Tapered Roller Bearing
6" x 3" Ductile Steel
Roller Bearing

6" x 2" Ductile Steel
Bronze Bearing
6" x 2" Ductile Steel Crown Tread
Bronze Bearing
4" x 2" Ductile Steel
Bronze Bearing

6" x 3" Ductile Steel
Tapered Roller Bearing
8" x 4" Ductile Steel
Tapered Roller Bearing
10" x 4" Ductile Steel
Tapered Roller Bearing
We do NOT include mounting Hardware.
Click on the Part Numbers for Pricing, Options and to ORDER.
WHEELS ONLY
Wheel
Diam.		 Tread
Profile		 Tread
Width

Hub
Length
Capacity
Lbs.
Click Part Numbers Below
For Price and to Order
Bearing
I.D. / Type		 I.D.
with
Spanner		 Approx.
Wt.
Caster Wheel Part Number
4" Flat 2" 2 7/16" 1,500 DS4x2 3/4" Roller 1/2" 5
1,500 MS4x2 3/4" Roller 1/2" 7
2,000 MS4x2BRNZ 3/4" Bronze 1/2" 7
Slight Crown 2" 2 7/16" 1,500 CDS4x2 3/4" Roller 1/2" 5
1,500 CDS4x2BRNZ 3/4" Bronze 1/2" 5
5" Flat 2" 2 7/16" 1,500 DS5x2 3/4" Roller 1/2" 6
2,000 FS5x2 3/4" Roller 1/2" 11
Slight Crown 2" 2 7/16" 1,500 CDS5x2 3/4" Roller 1/2" 6
2" 2 7/16" 1,500 CDS5x2BRNZ 3/4" Bronze 1/2" 6
6" Flat 2" 2 7/16" 1,500 DS6x2 3/4" Roller 1/2" 7
2" 2 7/16" 1,000 DS6x2BRNZ 3/4" Bronze 1/2" 7
2,000 FS6x2 3/4" Roller 1/2" 11
Slight Crown 2" 2 7/16" 1,500 CDS6x2 3/4" Roller 1/2" 7
2" 2 7/16" 1,500 CDS6x2BRNZ 3/4" Bronze 1/2" 7
Flat 2 1/2" 2 3/4" 3,500 DS6x2.50N 1" Roller 3/4" 12
3" 3 1/4" 6,000 DS6x3 1" Roller 3/4" 16
3 1/2" 10,000 DS6x3-.75T 3/4" Tapered N/A 16
10,000 DS6x3-1T 1" Tapered N/A 16
10,000 FS6x3-.75T 3/4" Tapered N/A 20
10,000 FS6x3-1T 1" Tapered N/A 20
8" Flat 2" 2 7/16" 1,500 DS8x2 3/4" Roller 1/2" 10 1/2
2,000 FS8x2 3/4" Roller 1/2" 16
Slight Crown 2" 2 7/16" 1,500 CDS8x2 3/4" Roller 1/2" 10 1/2
2" 2 7/16" 1,500 CDS8x2BRNZ 3/4" Bronze 1/2" 10 1/2
Flat 3" 3 1/4" 6,000 DS8x3 1" Roller 3/4" 21
3 1/2" 10,000 FS8x3-.75T 3/4" Tapered N/A 36
10,000 FS8x3-1T 1" Tapered N/A 37
4" 4 1/2" 15,000 DS8x4-1.25T 1 1/4" Tapered N/A 25
18,000 FS8x4-1.25T 1 1/4" Tapered N/A 40
10" Flat 3" 3 1/4" 6,000 DS10x3 1" Roller 3/4" 28
3 1/2" 10,000 FS10x3-.75T 3/4" Tapered N/A 32
10,000 FS10x3-1T 1" Tapered N/A 32
4" 4 1/2" 20,000 FS10x4-1.25T 1 1/4" Tapered N/A 52
12" Flat 4" 4 1/2" 20,000 FS12x4-1.25T 1 1/4" Tapered N/A 99

"DS" indicates Ductile Steel Caster Wheels.
"FS " indicate Forged Steel Caster Wheels.
MS " indicate Machined Steel Caster Wheels.

2" wide Roller Bearing wheels are furnished with Combo washers making the Hub Length 2 7/16" to fit into a caster bracket
( frame ). If the wheel is NOT going into a caster and you want 2 3/16" Hub Length, then specify "With Flat Washers" on your order in the "Special Instructions" section on the checkout page. Wheels with 2 3/16" hub length have a 3/4" ID Roller Bearing and do not come with a spanner.

2 1/2" & 3" wide wheels are furnished with the Hub Length shown in the table above. Flat Steel Thrust Washers and a Spanner Bushing are included.
You should never select on the basis of load capacity alone. Capacity ratings do not take into account the effort required to manually move a load. Capacity ratings are based on manual operation under ideal conditions. If these wheels are going to be moved by mechanically powered equipment, consult us for a reduced capacity rating based on your application.
Photos & graphics are for informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary unless specified. If wheel color is important, please contact us for current inventory.