Model
SS-3 UP to 300 lbs - 3" thru 5" Wheels |
|
Capacity up to 300
pounds per caster. Stainless steel casters are ideal for use in a wet or
corrosive environment.
Features: The caster brackets are made of
stamped stainless steel. Swivels are standard with a seal and grease fitting.
Wheel Bearing: PS = Precision Sealed Ball Bearings, D= Delrin Bearings,
P= Plain Bore |
|
Model
SS-K3 UP to 300 lbs - 3" thru 5" Wheels |
|
Capacity up to 300
pounds per caster. Stainless steel casters are ideal for use in a wet or
corrosive environment.
Features: The caster brackets are made of
stamped stainless steel. Wheel
Bearing: PS = Precision Sealed Ball
Bearings, D= Delrin Bearings, P= Plain Bore |
|
Model
SS-3A UP to 300 lbs - 4" & 5" Wheels |
|
Capacity up to 300
pounds per caster. Stainless steel casters are ideal for use in a wet or
corrosive environment. These casters are ideal for most light duty applications
where a caster must be totally immobile when the caster brake is applied.
Caster Model 3A has a unique brake which locks both the wheel and the swivel
bearing simultaneously. This "Total-Lock" brake insures that the swivel caster
will not turn when the wheel is locked. This combination wheel brake and swivel
lock is essential for safety in some applications - such as on worktables and
medical equipment. The Total-Lock brake is desireable whenever a brake is
needed because it makes a swivel caster totally immobile.
Features: *
Swivel Construction - Stamped steel. Swivel has double ball bearing. * Gray
Non-marking Soft Rubber, Gray Polyurethane, Black/Gray Polyurethane, Blue/Gray,
Red/Gray and Orange/Gray Polyurethane Wheels have precision sealed ball
bearings ( PS ) shielded by full thread guards. Polyolefin wheels do not have
ball bearings in the wheel ( P ). |
|