|
|
Stainless Steel Total Locking Casters Stainless
Caster Model 3A - Stem Caster |
|
Capacity up to
300 pounds per caster. Stainless steel casters are ideal for use in a
wet or corrosive environment.
These casters are ideal for most light
duty applications where a caster must be totally immobile when the caster brake
is applied. Caster Model 3A has a unique brake which locks both the wheel and
the swivel bearing simultaneously. This "Total-Lock" brake insures that the
swivel caster will not turn when the wheel is locked. This combination wheel
brake and swivel lock is essential for safety in some applications -
such as on worktables and medical equipment. The Total-Lock brake is desireable
whenever a brake is needed because it makes a swivel caster totally immobile.
|
Features: |
3" is not available in this
Model |
- Swivel Construction - Stamped
stainless steel. Swivel has double ball bearing.
- Gray Non-marking Soft Rubber, Gray
Polyurethane, Black/Gray Polyurethane, Blue/Gray, Red/Gray and Polyurethane
Wheels have precision sealed ball bearings ( PS )
shielded by full thread guards. Polyolefin do not have ball
bearings in the wheel ( P ). All Polyurethane Wheels have Delrin Bearings ( D
).
Notes:
- These rubber & polyurethane wheels are
NOT for use in a rack washer.
- We have a special polyurethane wheel for use
on racks or carts that are cleaned in a rack washer. Please call.
|
All stainless steel is NOT necessarily
non-magnetic. Click Here |
|
You
should never select on the basis of load capacity alone. There is no industry
standard for load capacity ratings and they may not include a factor for abuse.
Our capacity ratings are below what the casters are capable of carrying because
most applications have less than perfect conditions. Please refer to the
information shown at the bottom of this page. If you have any doubt as to which
wheel or caster is the BEST choice for your application contact us for a
recommendation.
CALL US AT 800-501-3808 |
|
|
|
Total-Lock Brake: |
|
|
Total Lock Brake in the
Un-Locked Position |
Total Lock Brake in the Locked
Position |
|
Total-Lock Brake:
- Combination Wheel Brake and Swivel Lock -
This brake simultaneously locks the wheel and the swivel. One step on the
activating pedal instantly locks the entire caster holding the equipment firmly
in place. One step on the release pedal frees the swivel and wheel.
Click here for a Plate
Mount Version |
|
|
Available
Stems |
We do not provide the nuts to attach threaded stem
casters. Threaded Stem Casters should NOT be used as a "Leveling Device"!
The weight should be supported by the top of the swivel bearing of the
caster, not somewhere above it on the threaded stem. |
Threaded Stems
- TS22 for 1/2" - 13 x 1 1/2"
- TS-S1 for 1/2" - 13 x 4"
- TS-S2 for 5/8" - 11 x 4"
- TS-S3 for 3/4" - 10 x 6"
- TS-S7 for 3/4" - 10 x 4"
|
|
|
Hollow Kingpin ( HOLE for your
BOLT )
1/2" Hole to mount with YOUR Bolt. Option
XHK1/2 will show in Options Box
|
|
|
Partially Threaded
Stem TS26N for 1/2" - 13 x 2 3/4"
|
|
|
|
We do
not provide the nuts to attach threaded stem casters. Threaded Stem Casters
should NOT be used as a "Leveling Device"! The weight should be supported
by the top of the swivel bearing of the caster, not somewhere above it on the
threaded stem. |
|
|
|
|
|
Option
RD3/4 |
Option
SQ7/8-GR |
Option
SQ3/4 |
Option
GR95 |
Option
GR91 |
|
|
Caster Photos are with 5" Wheels - 3", 4" and 5"
are available. |
Soft Gray Rubber Un-Locked
Position TS22 Stem |
Gray Poly Un-Locked Position EXR
Stem |
Black/Gray Poly Un-Locked
Position TS22 Stem |
Red/Gray Poly Un-Locked
Position EXR Stem |
Blue/Gray Poly Un-Locked
Position TS22 Stem |
Polyolefin ( Industrial Plastic
) Un-Locked Position EXR Stem |
All Poly Un-Locked
Position TS22 Stem |
Soft Gray Rubber No Brake EXR
Stem |
Gray Poly No
Brake TS22 Stem |
Black/Gray Poly No Brake EXR
Stem |
|
We do NOT include mounting
Hardware. |
Click on the Part Numbers for Pricing, Options and to
ORDER. |
|
|
- Swivel Radius for Casters with the
Total-Lock Brake - ALL SIZES - 4 3/8" |
Use the Polyolefin (
Industrial Plastic ) wheel for "Standing Loads". Polyolefin wheels eliminate
the possiblilty of a flat spot developing on the surfiace of polyurethane and
rubber tires when the weight exceeds 2/3 of the rated capacity when the object
is left parked most of the time . |
Threaded Stem
Casters should NOT be used as a "Leveling Device"! Capacity ratings are based
on the weight being directly on the top of the swivel bearing, not somewhere
above it on the threaded stem.
You should never
select on the basis of load capacity alone. Capacity ratings do not take into
account the effort required to manually move a load. Capacity ratings are based
on manual operation under ideal conditions. These casters are not to be moved
by mechanically powered equipment.
|
|
Photos & graphics are for
informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary
unless specified. If wheel color is important, please contact us for current
inventory. |
|
|
|