Capacity up to
900 pounds per caster.
Stainless steel casters are ideal for use in
a wet or corrosive environment. Typical applications include Pharmaceutical
Laboratories and Food Processing Plants.
Features:
- Swivel Construction: Cold Forged top plate
and yoke base from 1/4" stainless steel. Swivel has double ball bearing
design.
- Center Pin - 5/8" diameter, bolt and
nut.
- Lube Axle - 1/2" diameter hollow stainless
bolt with Zerk fitting.
- Wheel Bearing - D= Delrin Bearings are
Standard. Stainless Steel Roller Bearings are Optional.
- Grease Fittings - for swivel and wheel
bearings.
|
|
You
should never select on the basis of load capacity alone. There is no industry
standard for load capacity ratings and they may not include a factor for abuse.
Our capacity ratings are below what the casters are capable of carrying because
most applications have less than perfect conditions. Please refer to the
information shown at the bottom of this page. If you have any doubt as to which
wheel or caster is the BEST choice for your application contact us for a
recommendation.
CALL US AT 800-501-3808 |
|