|
|
Stainless Steel Caster - Caster Model 3 - Stem
Caster |
|
Capacity up to 300 pounds
per caster. Stainless steel stem casters are ideal for use in a wet or
corrosive environment.
Features:
The caster brackets are
made of stamped stainless steel. Swivels are standard
with a seal and grease fitting.
Wheel Bearing: PS =
Precision Sealed Ball Bearings, D= Delrin Bearings, P= Plain Bore
All stainless steel is NOT necessarily non-magnetic. Click
Here |
Optional Features: |
Wheel Brake - Click
Photos to Enlarge
|
TB Pedal on side |
Wheel Brakes are not designed to hold on
inclines. |
|
You
should never select on the basis of load capacity alone. There is no industry
standard for load capacity ratings and they may not include a factor for abuse.
Our capacity ratings are below what the casters are capable of carrying because
most applications have less than perfect conditions. Please refer to the
information shown at the bottom of this page. If you have any doubt as to which
wheel or caster is the BEST choice for your application contact us for a
recommendation.
CALL US AT 800-501-3808 |
|
|
|
Available Stems
|
We do not provide the nuts to attach threaded stem
casters. Threaded Stem Casters should NOT be used as a "Leveling Device"!
The weight should be supported by the top of the swivel bearing of the
caster, not somewhere above it on the threaded stem. |
Threaded Stem
- TS21 for 1/2" -
13 x 1"
- TS22 for 1/2" -
13 x 1 1/2"
|
|
|
|
|
Caster Photos are with 5" Wheels - 3", 4" and 5"
are available. |
Gray Soft Rubber Precision Sealed Ball
Bearings TS22 Stem |
Gray Polyurethane Precision Sealed Ball
Bearings EXR Stem |
Black/Gray Polyurethane Precision
Sealed Ball Bearings TS22 Stem |
Blue/Gray Polyurethane Precision
Sealed Ball Bearings EXR Stem |
Red/Gray Polyurethane Precision
Sealed Ball Bearings TS22 Stem |
All Polyurethane Delrin
Bearings TS22 Stem |
Phenolic Plain Bore ( No Bearings )
EXR Stem |
White Nylon Delrin
Bearings TS22 Stem |
Black Polyolefin
( Industrial
Plastic ) Plain Bore ( No Bearings ) TS22 Stem |
White Polyolefin
( Industrial
Plastic ) Plain Bore ( No Bearings ) EXR Stem |
|
We do NOT include mounting
Hardware. |
Click on the Part Numbers for Pricing, Options and to
ORDER. |
|
|
Use the Polyolefin ( Industrial Plastic )
wheel for "Standing Loads". Polyolefin wheels eliminate the possiblilty of a
flat spot developing on the surfiace of polyurethane and rubber tires when the
weight exceeds 2/3 of the rated capacity when the object is left parked most of
the time .
|
Threaded Stem
Casters should NOT be used as a "Leveling Device"! Capacity ratings are based
on the weight being directly on the top of the swivel bearing, not somewhere
above it on the threaded stem.
You should never
select on the basis of load capacity alone. Capacity ratings do not take into
account the effort required to manually move a load. Capacity ratings are based
on manual operation under ideal conditions. If these casters are going to be
moved by mechanically powered equipment, consult us for a reduced capacity
rating based on your application.
|
|
Photos & graphics are for
informational purposes only. Actual product may vary slightly from those shown.
Wheel colors may vary
unless specified. If wheel color is important, please contact us for current
inventory. |
|
|
|