|
Plate Casters Listed by Capacity - 300 lbs to 17,000
lbs |
Model 3 UP
to 300 lbs - 3" thru 5" Wheels Small Plate |
|
Click here for
More Information |
Capacity up to 300
pounds per caster. These institutional casters are ideal for most types of
institutional equipment, and are offered with a wide selection of wheels.
Features: * Swivel Construction - Stamped steel. Swivel has double ball
bearing with hardened raceways. Metal cover shields swivel bearings from dirt
and dust. * Center Pin - 1/2" diameter steel rivet. * Axle - 3/8" diameter bolt
with lock nut. * Wheel Bearing - PS= Precision Sealed Ball Bearings, B= Ball
Bearings, D= Delrin Bearings, P= Plain Bore * Finish - external metal parts are
Zinc plated. |
|
Model
3A UP to 300 lbs - 3" thru 5" Wheels
|
Also Available in Stainless
Steel |
Click
here for More Information |
Capacity up to 300
pounds per caster. These institutional casters are ideal for any light duty
application where the caster must be totally immobile when the caster brake is
applied. Caster Model 3A has a unique brake which locks both the wheel and the
swivel bearing at the same time. This "Total-Lock" brake insures that the
swivel caster will not turn when the wheel is locked. This combination wheel
brake and swivel lock is essential for safety in some applications - such as on
worktables, tablesaws, and medical equipment. The Total-Lock brake is
desireable whenever a brake is needed because it makes a swivel caster totally
immobile. The wheels featured with Caster Model 3A are non-marking, and all
except Polyolefin can be used on hardwood floors. Polyolefin wheels are best at
reducing the risk of a flat spot occuring when loads are left standing for
prolong periods. Gray Soft Rubber and Polyurethane wheels have a sealed
precision ball bearing. They provide floor and cargo protection, quiet
operation, and are very easy rolling. Try a set of 4 casters. You will be
amazed at their performance! |
|
Model
K3A UP to 300 lbs - 3" thru 5" Wheels
|
|
Click
here for More Information |
Capacity up to 300
pounds per caster. These institutional casters are ideal for any light duty
application where the caster must be totally immobile when the caster brake is
applied. Caster Model K3A has a unique brake which locks both the wheel and the
swivel bearing at the same time. This "Total-Lock" brake insures that the
swivel caster will not turn when the wheel is locked. This combination wheel
brake and swivel lock is essential for safety in some applications - such as on
worktables, tablesaws, and medical equipment. The Total-Lock brake is
desireable whenever a brake is needed because it makes a swivel caster totally
immobile. The wheels featured with Caster Model K3A are non-marking, and all
except Polyolefin can be used on hardwood floors. Polyolefin wheels are best at
reducing the risk of a flat spot occuring when loads are left standing for
prolong periods. Gray Soft Rubber and Polyurethane wheels have a sealed
precision ball bearing. They provide floor and cargo protection, quiet
operation, and are very easy rolling. Try a set of 4 casters. You will be
amazed at their performance! |
|
|
|
Model K3 UP
to 300 lbs - 3" thru 5" Wheels Large Plate |
|
Click here for
More Information |
Capacity up to 300 pounds per
caster. These institutional casters are ideal for most types of institutional
equipment, and are offered with a wide selection of wheels.
Features: *
Swivel Construction - Stamped steel. Swivel has double ball bearing with
hardened raceways. Metal cover shields swivel bearings from dirt and dust. *
Center Pin - 1/2" diameter steel rivet. * Axle - 3/8" diameter bolt with lock
nut. * Wheel Bearing - PS= Precision Ball Bearings, B= Ball Bearings, P= Plain
Bore * Finish - external metal parts are Zinc plated. |
|
Model 9 UP
to 900 lbs - 3 1/4" thru 8" Wheels
|
|
Click here for
More Information |
Capacity up to 900 pounds per
caster. These rugged cold forged casters are recommended only for manually
moved applications. Model 9 is our most popular industrial caster due to its
widespread use throughout industry and its low initial cost.
Features:
* Swivel Construction - cold forged top plate and yoke base from 1/4" steel.
Swivel has double ball bearing with hardened raceways. * Center Pin - 5/8"
diameter, rivet or bolt and nut. * Legs - 1/4" thick, welded outside only. *
Axle - 1/2'' diameter hollow bolt with lock nut. * Wheel Bearing - R= Roller
Bearing, B= Ball Bearings, D= Delrin Bearings, PS= Precision Sealed Ball
Bearings, P= Plain Bore * Grease Fittings - for swivel and wheel bearings. *
Finish - external metal parts are zinc plated |
|
Model
9A UP to 900 lbs - 4" thru 8" Wheels
|
|
Click
here for More Information |
Capacity up to 900 pounds per
caster. These Industrial Casters are used where the caster must be totally
immobile when the caster brake is applied. Caster Model 9A has a unique brake
which locks both the wheel and the swivel bearing at the same time. This
"Total-Lock" brake insures that the swivel caster will not turn when the wheel
is locked. This combination wheel brake and swivel lock is essential for safety
in some applications - such as on worktables, machines and large mobil racks.
The total-locking brake is desireable whenever a swivel caster must be totally
immobile.
Features: * Swivel Construction - cold forged top plate and
yoke base from 1/4" steel. Swivel has double ball bearing with hardened
raceways. * Center Pin - 5/8" diameter, rivet or bolt and nut. * Legs - 1/4"
thick. * Axle - 1/2'' diameter hollow bolt with lock nut. * Wheel Bearing - R=
Roller Bearing, B= Ball Bearings, D= Delrin Bearings, P= Plain Bore * Grease
Fittings - for swivel and wheel bearings. * Finish - external metal parts are
zinc plated |
|
Model 14 UP
to 1,400 lbs - 4" thru 8" Wheels
|
|
Click here for
More Information |
Capacity up to 1,400 pounds
per caster. Model 14 is a cold forged caster with a larger swivel bearing and
center pin than Model 9. It can be used for up to 1400 lbs per caster on
manually moved equipment. If this caster is to be used with mechanically
powered equipment we suggest not exceeding a weight of 800 lbs per caster. As a
general rule you get a better return on your investment if you step up to
Caster Model G15 or Caster Model 15 with 2" wide wheels.
Features: *
Swivel Construction - cold forged top plate and yoke base from 1/4" steel.
Swivel has double ball bearing with hardened raceways. * Center Pin 3/4"
diameter rivet or bolt and nut. * Legs - 1/4" thick, welded outside only. *
Axle - 1/2'' diameter hollow bolt with lock nut. * Wheel Bearing -3/4" I.D.
hardened straight roller bearings. * Grease Fittings - for swivel and wheel
bearings. * Finish - external metal parts are zinc plated. |
|
Model
G15 UP to 1,500 lbs - 4" thru 8" Wheels Small Plate |
|
Click here
for More Information |
Capacity up to 1,500 pounds
per caster. Model 15 begins our industrial casters with precision machined
swivel bearings. This design provides superior performance on both manually
moved and mechanically powered equipment. Benefits include easier swiveling,
reduced swivel vibration, and longer trouble free performance. Although this
caster has the same wheels as shown in Caster Model 9, Model G15 is TWICE as
good from the standpoint of performance and expected length of life.
Features: * Swivel Construction - precision machined combination load
and thrust bearing with heat treated raceway. No center pin. * Legs - 1/4"
thick, welded inside and out. * Axle - 1/2'' diameter hollow bolt with lock
nut. * Wheel Bearing - R= Roller Bearing, B= Ball Bearings, D= Delrin Bearings,
PS= Precision Sealed Ball Bearings, P= Plain Bore * Grease Fittings - for
swivel and wheel bearings. * Finish - external metal parts are zinc plated.
|
|
Model 15 UP
to 1,500 lbs - 4" thru 8" Wheels Large Plate |
|
Click here for
More Information |
Capacity up to 1,500 pounds
per caster. Model 15 casters have precision machined swivel bearings. This
design provides superior performance on both manually moved and mechanically
powered equipment. Benefits include easier swiveling, reduced swivel vibration,
and longer trouble free performance.
Features: * Swivel Construction -
precision machined combination load and thrust bearing with heat treated
raceway. No center pin. * Legs - 1/4" thick, welded inside and out. * Axle -
1/2'' diameter hollow bolt with lock nut. * Wheel Bearing - 3/4" I.D. hardened
straight roller bearings. CB wheels have ball bearings. * Grease Fittings - for
swivel and wheel bearings. * Finish - external metal parts are zinc plated.
|
|
Model 30 UP
to 3,000 lbs - 6" thru 10" Wheels |
|
Click here for
More Information |
Capacity up to 3,500 pounds
per caster. Model 30 features a large swivel and wheel bearing which allows for
heavy loads and more arduous service. Model 30 has a precision machined swivel
bearing, which provides superior performance on both manually moved and
mechanically powered equipment. Benefits include easier swiveling, reduced
swivel vibration, and longer trouble free performance. All wheels shown in
Model 30 can be furnished in Caster Model 50 if your application requires a
more rugged caster bracket.
Features: * Swivel Construction - precision
machined combination load and thrust bearing with heat treated raceway. No
center pin. * Legs - 3/8" thick, welded inside and out. * Axle - 3/4'' diameter
hollow bolt with lock nut. * Wheel Bearing - 1" I.D. hardened straight roller
bearings. * Grease Fittings - for swivel and wheel bearings. * V Groove Width -
7/8" Standard. * Finish - external metal parts are zinc plated. |
|
Model 50 UP
to 5,000 lbs - 6" thru 12" Wheels |
|
Click here for
More Information |
Capacity up to 5,000 pounds
per caster. Model 50 has a large top plate and thick legs, which allow for
heavy loads and more arduous service. Model 50 has a precision machined swivel
bearing, which provides superior performance on both manually moved and
mechanically powered equipment. Benefits include easier swiveling, reduced
swivel vibration, and longer trouble free performance.
Features: *
Swivel Construction - precision machined combination load and thrust bearing
with heat treated raceway. No center pin. * Legs - 3/8" thick, welded inside
and out. * Axle - 3/4'' diameter hollow bolt with lock nut. * Wheel Bearing -
1" I.D. hardened straight roller bearings. Items marked *T have 3/4" Tapered
Roller Bearings. * Grease Fittings - for swivel and wheel bearings. * V Groove
Width - 7/8" Standard. * Finish - external metal parts are zinc plated. |
|
Model
100 UP to 10,000 lbs - 6" thru 12" Wheels |
|
Click here
for More Information |
Capacity up to 10,000 pounds
per caster. Model 100 has a large top plate and thick legs, which allow for
heavy loads and more arduous service. Model 100 has a precision machined swivel
bearing, which provides superior performance on both manually moved and
mechanically powered equipment. Benefits include easier swiveling, reduced
swivel vibration, and longer trouble free performance.
Features: *
Swivel Construction - precision machined combination load and thrust bearing
with heat treated raceway. No center pin. * Legs - 3/8" thick, welded inside
and out. * Axle - 1'' diameter solid bolt with lock nut on 3" wide wheels. *
Axle - 1 1/4'' diameter solid bolt with lock nut on 4" wide wheels. * Wheel
Bearing - 1" tapered roller bearings on 3" wide wheels. * Wheel Bearing - 1
1/4" tapered roller bearings on 4" wide wheels. * Grease Fittings - for swivel
and wheel bearings. * V Groove Width - 1 3/8" Standard. * Finish - Brackets are
zinc plated. Ductile steel wheels are painted. |
|
Model 2-50, 2-100 & 2-150 UP to 10,000 lbs - 6" thru 12"
Wheels Dual Wheel |
|
Click here for More Information |
Dual Wheel casters provide a
higher load capacity with a minimal overall height. The larger footprint ( two
wheels instead of one ) enhances stability and spreads the load over a larger
floor area. The differential action inherent in all swivel dual wheel designs
minimizes the effort required to change directions. We chose to show only our
highest capacity polyurethane wheels because they minimize floor wear. If your
application requires ductile steel wheels, please contact us for pricing.
Features: * Hot forged steel precision machined swivel bearings. * No
center pin to fail in arduous applications. * Tapered roller bearings are
standard in wheels to withstand side thrust. * All wheels have extra high
capacity polyurethane tires to provide floor protection and to minimize the
chance of the tires developing a flat spot under load. * Zerk fittings to
lubricate swivel and wheel bearings. * Zinc plated finish for added rust
resistance. |
|
Model
150 UP to 15,000 lbs - 8" thru 12" Wheels
|
|
Click here
for More Information |
Capacity 20,000 pounds per
caster. Model 150 is capable of loads up to 20,000 Lbs. per caster under ideal
operating conditions. We feature this model at 15,000 Lbs. capacity because
caster applications almost never involve ideal operating conditions. If your
application requires more than 15,000 Lbs. capacity per caster, please contact
us for a recommendation.
Features: * Swivel Construction - a precision
machined swivel bearing provides easier swiveling, reduced swivel vibration and
longer trouble free performance. * Legs - 1/2" thick steel. * Axle - 1 1/4"
diameter bolt. * Wheel Bearing - 1 1/4" tapered roller bearings. * Grease
Fittings - for swivel and wheel bearings. * Finish - external metal parts are
zinc plated. |
|
Model
B150 UP to 15,000 lbs - 8" thru 12" Wheels
|
|
Click here
for More Information |
Capacity 20,000 pounds per
caster. Model B150 is designed for the heaviest caster applications. We feature
this caster at up to 15,000 Lbs. capacity per caster. Modification can be made
to provide 20,000 Lbs. capacity per caster when needed. Model B150 is almost
exclusively used in conjunction with mechanically powered equipment. Two
precision machined swivel bearings provide easier swiveling, reduced swivel
vibration, and longer trouble free performance. Load ratings are based on a
speed up to 3 mph under ideal operating conditions. Since it is rare for a
caster application to involve ideal operating conditions, we suggest you rely
on our experienced and knowledgeable staff for a written recommendation.
Features: * Swivel Construction - Two precision machined swivel
bearings * Legs - 1/2" thick formed steel. * Axle - 1 1/4" diameter bolt. *
Wheel Bearing - Two 1 1/4" tapered roller bearings. * Grease Fittings - for
swivel and wheel bearings. * Finish - external metal parts are painted. |
|
|