Model
L3
UP to 250 lbs - 3" thru 5" Wheels |
 |
| Click
here for More Information |
Stem
sizes:
Threaded - 3/8" 16 x 1 1/2" Long
Grip Ring - 7/16" x 1 3/8"
Long
Capacity up to 250 pounds per caster. These institutional stem
casters are ideal for most types of institutional equipment, and are offered
with a wide selection of wheels.
Features: * Swivel Construction -
Stamped steel. Swivel has double ball bearing with hardened raceways. Metal
cover shields swivel bearings from dirt and dust. * Axle - 3/8" diameter bolt
with lock nut. * Wheel Bearing - PS= Precision Sealed Ball Bearings, B= Ball
Bearings, D= Delrin Bearings, P= Plain Bore * Finish - external metal parts are
Zinc plated. |
|
Model
3
UP to 300 lbs - 3" thru 5" Wheels |
 |
| Click here
for More Information |
Stem
sizes:
Threaded - 1/2" 13 x 1 1/2" Long
Threaded - 1/2" 13 x 2 3/4"
Long
1/2" Hole for your Bolt
Expanding Rubber Stems - 3/4" to 1
13/16"
Capacity up to 300 pounds per caster. These institutional stem
casters are ideal for most types of institutional equipment, and are offered
with a wide selection of wheels.
Features: * Swivel Construction -
Stamped steel. Swivel has double ball bearing with hardened raceways. Metal
cover shields swivel bearings from dirt and dust. * Axle - 3/8" diameter bolt
with lock nut. * Wheel Bearing - PS= Precision Sealed Ball Bearings, B= Ball
Bearings, D= Delrin Bearings, P= Plain Bore * Finish - external metal parts are
Zinc plated. |
|
Model
3A
UP to 300 lbs - 3" thru 5" Wheels |
 |
| Click
here for More Information |
Stem
sizes:
Threaded - 1/2" 13 x 1 1/2" Long
Threaded - 1/2" 13 x 2 3/4"
Long
1/2" Hole for your Bolt
Expanding Rubber Stems - 3/4" to 1
13/16"
Stem sizes:
Threaded - 1/2" 13 x 1 1/2" Long
Threaded -
1/2" 13 x 2 3/4" Long
1/2" Hole for your Bolt
Expanding Rubber Stems -
3/4" to 1 13/16"
Capacity up to 300 pounds per caster. These
institutional casters are ideal for any light duty application where the caster
must be totally immobile when the caster brake is applied. Caster Model 3A has
a unique brake which locks both the wheel and the swivel bearing at the same
time. This "Total-Lock" brake insures that the swivel caster will not turn when
the wheel is locked. This combination wheel brake and swivel lock is essential
for safety in some applications - such as on worktables, tablesaws, and medical
equipment. The Total-Lock brake is desireable whenever a brake is needed
because it makes a swivel caster totally immobile. The wheels featured with
Caster Model 3A are non-marking, and all except Polyolefin can be used on
hardwood floors. Polyolefin wheels are best at reducing the risk of a flat spot
occuring when loads are left standing for prolong periods. Gray Soft Rubber and
Polyurethane wheels have a sealed precision ball bearing. They provide floor
and cargo protection, quiet operation, and are very easy rolling. Try a set of
4 casters. You will be amazed at their performance! |
|
