Sockets for Casters with Grip Neck Stems
- These hard to find sockets are now available for purchase separately.
- Sockets may be returned for exchange only, please measure carefully.
- Sockets shown below fit our casters. They may or may not fit other casters.
- We have a $20 minimum order which applies to both website and phone in orders.
for use with
Grip Neck Stem
5/16" x 1 1/2"
Socket Dimensions
When measuring your socket, reference the 3 dimensions for our sockets as shown in the Graphic for Dimensions A, B, C. We will also reference other items; Hole inside dimensions, Maximum size of the compatible stem and the shape of the socket.
Tube Inside Diam.
.433 Round
Socket Dim A
.450
Socket Dim B
.935
Socket Dim C
1.775
Max Stem Size
5/16" x 1 1/2"
Tube Inside Diam.
.678 Square
Socket Dim A
.695
Socket Dim B
.765
Socket Dim C
1.760
Max Stem Size
5/16" x 1 1/2"
for use with
Grip Neck Stem
5/16" x 1 1/2"
Click on the Socket PHOTO to order
Metal Socket with Teeth for use with Grip Neck Stem
Attach caster by drilling a 3/8" x 1 5/8" hole. Install socket, then insert caster.
Part Number
MS-2719
Metal Socket with Teeth
for use with
Grip Neck Stem
5/16" x 1 1/2"
Click on the Socket PHOTO to order
Metal Socket for use
with Grip Neck Stem
Commonly called a "Caster Clip", this socket is
designed to install casters on the edge of 3/4"
Particle Board, MDF or similar sheet goods. Attach caster by
drilling a 3/8" x 1 5/8" hole. Install socket, then insert caster. You may want
to "drill & tack nail" the bottom face or add some silicon sealer to the
hole when installing.
Part Number CC34 - Y =
3/4"