Casters with Twin Soft Rubber Wheels The Casters with Twin Soft Rubber Wheels are a popular choice. They are available with 2" wheels ( 50mm ), 2 3/8" wheels ( 60mm) and 3" wheels ( 75mm ). The soft rubber wheels neither scratch nor mark hard wood or any hard floor surface. Available in Black or Two Tone Gray. Brakes that lock the wheels are also available on these casters
Plastic Sockets for Grip Neck Stem | |||
Round Sockets | Square Sockets | ||
Inside Diameter of
Tubing ( I.D. ) |
Inside Diameter of Tubing ( I.D. ) |
||
.433" Diam. | .495" Diam. | .678" Sq. | |
.620" Diam. | .652" Diam. | .880" Sq. |
Plastic Sockets for Grip Ring Stem | |||
Round Sockets | Square Sockets | ||
Inside Diameter of
Tubing ( I.D. ) |
Inside Diameter of Tubing ( I.D. ) |
||
.805" Diam. | .870" Diam. | .870" Square | |
.902" Diam. | .992" Diam. | .902" Square |
Metal Socket with Teeth for use with Grip Neck Stem
Attach caster by drilling a 3/8" x 1 5/8" hole. Install socket, then insert caster.
Part Number
MS-2719
Metal Socket with Teeth
Metal Socket for use
with Grip Neck Stem
Commonly called a "Caster Clip", this socket is
designed to install casters on the edge of 3/4"
Particle Board, MDF or similar sheet goods. Attach caster by
drilling a 3/8" x 1 5/8" hole. Install socket, then insert caster. You may want
to "drill & tack nail" the bottom face or add some silicon sealer to the
hole when installing.
Part Number CC34 - Y =
3/4"
Metal Socket for use
with Grip Ring Stem
This socket is used to
install casters with a 7/16" Diameter Grip Ring Stem on WOOD
furniture.
To attach, drill a 5/8" x 1 1/2" hole. Insert socket
and attach with 1/4" wood screws ( Not supplied ). Insert caster into
socket.
Part
Number MS-2255
Sombrero Socket
Metal Socket for use
with Grip Ring Stem
This socket is used to install casters with a 7/16"
Diameter Grip Ring Stem on WOOD or Steel furniture. The Tack
Plate Diameter is approx 1" and the overall length is 1.46"
To attach in
wood, drill a 5/8" x 1 1/2" hole. Apply Epoxy Glue** ( Not supplied ) to socket
and insert into hole. Allow to harden before inserting caster into socket. (
This socket is not plated and can also be welded to steel. )
Part
Number MS-S10X
** Use a 2
part Epoxy available at Home Depot, Lowes or any Hardware Store.
Metal Socket for use
with Grip Ring Stem
This socket is used to install casters with a 7/16"
Diameter Grip Ring Stem on WOOD furniture.
Attach to inside of frame with wood screws
( Not supplied ). Insert caster into socket.
Part
Number MB180
Straight Bracket
Metal Socket for use with Grip Ring Stem
This socket is used to install casters with a 7/16" Diameter Grip Ring Stem on WOOD furniture.
Attach to inside corner of frame with wood screws
( Not supplied ). Insert caster into socket.
Part Number MB90
Corner
Bracket