Chair & Furniture Casters for Hardwood Floors
Elite Metal Hooded Single Wheel Caster This caster will work well on either hard floor surfaces or short pile carpet. It will not mark or scratch any hardwood floors. Recommended for any hard floor surface: hardwood, ceramic tile, marble, cement, extra thick plastic mats. Can also be used on short pile carpet. When used on carpets, normal carpet wear can be expected. Designed for frequent movement on an Executive or Clerical chair. Grip Ring Stem size is 7/16" Diameter x 7/8" Long. Soft rubber wheels will protect any hard floor surface: hardwood, ceramic tile, marble, cement or extra thick plastic mats. Select polyurethane for carpet or hard floors. The Crown Tread on the wheel enhances the ability to swivel or change direction. Precision sealed ball bearing in the wheel provides easy rolling and never needs maintenance. The swivel bearing has two heat treated raceways for easy swiveling and long caster life. Bright chrome finish gives a clean, elegant appearance. Gray Soft Rubber wheels are available in 2" or 3" diameter and are recommended for hard floors. Polyurethane wheels are available in 2" and 3" diameter. 2" are recommended only for hard floor surfaces. 3" polyurethane wheels can be used on either hard floors or carpet. We do not warrant any wheel for a SOFT WOOD Floor.
THESE SOCKETS WILL BE SHOWN AS AN OPTION FOR GRIP RING STEM CASTERS IN THE SHOPPING CART.
for use with
Grip Ring Stem
| Plastic Sockets for Grip Ring Stem | |||
| Round Sockets | Square Sockets | ||
| Inside Diameter of
Tubing ( I.D. ) |
Inside Diameter of Tubing ( I.D. ) |
||
| .805" Diam. | .870" Diam. | .870" Square | |
| .902" Diam. | .992" Diam. | .902" Square | |
for use with
Grip Ring Stem
7/16" x 1 1/4"
The length of your stem my be shorter but not longer
Metal Socket for use
with Grip Ring Stem
This socket is used to
install casters with a 7/16" Diameter Grip Ring Stem on WOOD
furniture.
To attach, drill a 5/8" x 1 1/2" hole. Insert socket
and attach with 1/4" wood screws ( Not supplied ). Insert caster into
socket.
Part
Number MS-2255
Sombrero Socket
for use with
Grip Ring Stem
7/16" x 1 1/4"
The length of your stem my be shorter but not longer
Metal Socket for use
with Grip Ring Stem
This socket is used to install casters with a 7/16"
Diameter Grip Ring Stem on WOOD or Steel furniture. The Tack
Plate Diameter is approx 1" and the overall length is 1.46"
To attach in
wood, drill a 5/8" x 1 1/2" hole. Apply Epoxy Glue** ( Not supplied ) to socket
and insert into hole. Allow to harden before inserting caster into socket. (
This socket is not plated and can also be welded to steel. )
Part
Number MS-S10X
** Use a 2
part Epoxy available at Home Depot, Lowes or any Hardware Store.
To use these sockets, select casters with a stem that looks like this.
Metal Socket for use
with Grip Ring Stem
This socket is used to install casters with a 7/16"
Diameter Grip Ring Stem on WOOD furniture.
Attach to inside of frame with wood screws
( Not supplied ). Insert caster into socket.
Part
Number MB180
Straight Bracket
To use these sockets, select casters with a stem that looks like this.
Metal Socket for use with Grip Ring Stem
This socket is used to install casters with a 7/16" Diameter Grip Ring Stem on WOOD furniture.
Attach to inside corner of frame with wood screws
( Not supplied ). Insert caster into socket.
Part Number MB90
Corner
Bracket
Sockets & Brakes, if available, will be shown in the Shopping Cart
7/16" Grip Ring Stem
Elite Metal Hooded
Single Rubber Wheel
7/16" Grip Ring Stem
Elite Metal Hooded
Single Rubber Wheel
7/16" Grip Ring Stem
Elite Metal Hooded
Single Polyurethane Wheel
7/16" Grip Ring Stem
Elite Metal Hooded
Single Polyurethane Wheel