Total Locking Stem Mounted Casters
Caster Model K3A Stem
Features:- Swivel Construction - Stamped steel. Swivel has double ball bearing.
- Combination Wheel Brake and Swivel Lock - This brake simultaneously locks the wheel and the swivel. One step on the Nylon activating pedal instantly locks the entire caster holding the equipment firmly in place. One step on the release side of the pedal frees the swivel and wheel.
Capacity up to 300 pounds per caster.
These institutional casters are ideal for any light duty application where the caster must be totally immobile when the caster brake is applied. Caster Model K3A has a unique brake which locks both the wheel and the swivel bearing at the same time. This "Total-Lock" brake insures that the swivel caster will not turn when the wheel is locked. This combination wheel brake and swivel lock is essential for safety in some applications - such as on worktables, table saws, and medical equipment. The Total-Lock brake is desirable whenever a brake is needed because it makes a swivel caster totally immobile. The wheels featured with Caster Model K3A are non-marking, and all except Polyolefin can be used on hardwood floors. Polyolefin wheels are best at reducing the risk of a flat spot occurring when loads are left standing for prolong periods. Gray Soft Rubber and Polyurethane wheels have a sealed precision ball bearing. They provide floor and cargo protection, quiet operation, and are very easy rolling. Try a set of 4 casters. You will be amazed at their performance!
| You
should NEVER select on the basis of load capacity alone. If you have any doubt
as to which wheel or caster is the BEST choice for your application contact us
for a recommendation. CALL US AT 800-501-3808 |
 |
 |
| Total Lock Brake in the
Un-Locked Position |
Total Lock Brake in the Locked Position |
Combination Wheel Brake and Swivel Lock
This brake simultaneously locks the wheel and the swivel. One step on the
activating pedal instantly locks the entire caster holding the equipment firmly
in place. One step on the release pedal frees the swivel and wheel.
Partially Threaded Stem
TS26N for 1/2" - 13 x 2 3/4"
Available with 3", 4" & 5"
Wheels
Threaded Stems
- TS22 for 1/2" - 13 x 1 1/2"
- TS5/8 for 5/8" - 11 x 1 3/4"
- TS3/4 for 3/4" - 10 x 1 3/4"
- TSC1 for 1/2" - 13 x 4"
- TSC2 for 5/8" - 11 x 4"
- TSC3 for 3/4" - 10 x 6"
Grip Ring Stem
GR-91
7/16" Diameter x 1 3/8"
Long
Available with 3", 4" & 5"
Wheels
Hollow Kingpin
HK1/2
1/2" Hole to mount with YOUR Bolt.
Available with 3", 4" & 5"
Wheels
Expanding Ruber Stem
Available with 3", 4" & 5" Wheels
Expanding Rubber Stem Details for Square & Round Tubing |
|||
| Stem # | ID of Tubing | Rubber Range ( smallest size to largest size ) | |
| ER9 | 3/4" | .720" to .851" | |
| ER27 | 7/8" | .852" to .927" ( fits 1" O.D. 16 or 18 Gauge ) | |
| ER28 | 1" | .928" to 1.029" | |
| ER29 | 1 1/8" | 1.030" to 1.140" | |
| ER17 | 1 1/4" | 1.178 to 1.303 | |
| ER25 | 1 3/8" | 1.360" to 1.425" | |
| ER26 | 1 1/2" | 1.426" to 1.589" ( fits 1 5/8" O.D. 16 or 18 Gauge ) | |
| ER21 | 1 13/16" | 1.790" to 1.850" | |
Questions? Call us toll free at 800 - 501 3808 |
|||
Mounting Stem
GR95 - Formally GR2
Mounting Stem
SQ7/8-GR
GMounting Stem
SQ3/4
Mounting Stem
SQ7/8-CH3
Press the buttons below to see that wheel in the caster for more information and to order.
Blue Soft Rubber Wheels
Roller Bearing
Capacities to 350 lbs
Gray Rubber Wheels
Capacities to 250 lbs
High Capacity
Rubber Wheels
Capacities to 300 lbs
Polyurethane on
Polyolefin Wheels
Capacities to 250 lbs
Polyurethane on
Aluminum Wheels
Capacities to 300 lbs
Polyolefin Wheels
Capacities to 300 lbs
Nylon Wheels
Ball Bearings
Capacities to 300 lbs