Model K3A Total Locking Caster

Caster Model K3A

Features:

• Swivel Construction - Stamped steel. Swivel has double ball bearing.
• Combination Wheel Brake and Swivel Lock - This brake simultaneously locks the wheel and the swivel. One step on the Nylon activating pedal instantly locks the entire caster holding the equipment firmly in place. One step on the release side of the pedal frees the swivel and wheel.

Capacity up to 300 pounds per caster.
These institutional casters are ideal for any light duty application where the caster must be totally immobile when the caster brake is applied. Caster Model K3A has a unique brake which locks both the wheel and the swivel bearing at the same time. This "Total-Lock" brake insures that the swivel caster will not turn when the wheel is locked. This combination wheel brake and swivel lock is essential for safety in some applications - such as on worktables, table saws, and medical equipment. The Total-Lock brake is desirable whenever a brake is needed because it makes a swivel caster totally immobile. The wheels featured with Caster Model K3A are non-marking, and all except Polyolefin can be used on hardwood floors. Polyolefin wheels are best at reducing the risk of a flat spot occurring when loads are left standing for prolong periods. Gray Soft Rubber and Polyurethane wheels have a sealed precision ball bearing. They provide floor and cargo protection, quiet operation, and are very easy rolling. Try a set of 4 casters. You will be amazed at their performance!

Wheel Brakes are not designed to hold on inclines.

You should NEVER select on the basis of load capacity alone. If you have any doubt as to which wheel or caster is the BEST choice for your application contact us for a recommendation. CALL US AT 800-501-3808

These wheels are our Most Popular for this caster.
Press the buttons below to see that wheel in the caster for more information and to order.