Stainless Steel Plate Mounted Casters
Stainless Steel Caster Model 9
Features:- Swivel Construction - cold forged top plate and yoke base from 1/4" Stainless Steel.
- Legs - 1/4" thick, welded inside and out.
- Axle - 1/2'' diameter hollow bolt with lock nut.
- Standard Wheel Bearing:
Depends on Wheel Chosen. See wheel options below. - Grease Fittings - for swivel and wheel bearings.
Capacity up to 900 pounds per caster.
Stainless steel casters are ideal for use in a wet or corrosive environment. Typical applications include Pharmaceutical Laboratories and Food Processing Plants.
| You
should NEVER select on the basis of load capacity alone. If you have any doubt
as to which wheel or caster is the BEST choice for your application contact us
for a recommendation. CALL US AT 800-501-3808 |
Optional Features
Total Locking Brake OFF
Total Locking Brake ON
The Total Locking Option ( TL ) changes the Swivel Radius of the caster to the following;
4", 5" and 6" diameter wheels = 6 1/2" Swivel Radius
8" diameter wheel = 7 1/2" Swivel Radius
Side Lock Brake
TB - Pedal
on side of Wheel
Locks ONLY the wheel from rolling.
Wheel Brakes are
not designed
to hold on inclines.
Welded Swivel Lock
SL4 -
Locks Swivel, NOT wheel.
Raceway Seals
RS - Seals Upper and Lower
Raceways from dirt and debris, improves grease retention, can reduce noise and
may prolong caster life.
CAN
NOT BE USED WITH SWIVEL LOCK OPTION
Optional Wheel Bearings
PS - Non-Stainless Sealed Precision Ball Bearings
SPS - Stainless Sealed Precision Ball Bearings
SSR - Stainless Roller Bearing.
Press the buttons below to see that wheel in the caster for more information and to order.
High Capacity
Rubber Wheels
Capacities to 550 lbs
Polyurethane on
Polyolefin Wheels
Capacities to 700 lbs
All Polyurethane
Wheels
Capacities to 900 lbs
Polyolefin Wheels
Capacities to 800 lbs
High Capacity
Polyolefin Wheels
Capacities to 1200 lbs