Stainless Steel Model 3 Stem Caster with Polyolefin Wheels

Polyolefin Caster Wheels are injection molded from a blend of thermoplastic polymers forming a one piece solid sanitary design. These Polyolefin wheels, as with Nylon wheels, are especially suited for wet and corrosive applications. They are very resistant to most commonly encountered liquids. Polyolefin wheels have a lower capacity and a more limited temperature range than Nylon wheels. In a cold dry environment, such as a refrigerated store room, Polyolefin wheels may become brittle. They should not be used in a freezer or a heat application above 180°F intermittent usage, such as a rack washer.

Durometer: 65D ±5 for all Polyolefin Wheels.
Temperature Range is 40°F to 180°F

Press the wheel size for more information and to order.
You will choose the stem type and other options in the Shopping Cart.


Tread Width 1 1/4"
Ball Bearings