Polyolefin Caster
Wheels are injection molded from a blend of thermoplastic polymers forming a
one piece solid sanitary design. These Polyolefin wheels, as with Nylon wheels,
are especially suited for wet and corrosive applications. They are very
resistant to most commonly encountered liquids. Polyolefin wheels have a lower
capacity and a more limited temperature range than Nylon wheels. In a cold
dry environment, such as a refrigerated store room, Polyolefin wheels may
become brittle. They should not be used in a freezer or a heat application
above 180°F intermittent usage, such as a rack washer.
Durometer: 65D ±5 for all Polyolefin Wheels.
Temperature Range is 40°F to
180°F