Plate Mounted Casters
Caster Model 14 - Plate Mount
Features:- Swivel Construction - cold forged top plate and yoke base from 1/4" steel. Swivel has double ball bearing with hardened raceways.
- Center Pin 3/4" diameter rivet or bolt and nut.
- Legs - 1/4" thick, welded outside only.
- Axle - 1/2'' diameter hollow bolt with lock nut.
- Grease Fittings - for swivel and wheel bearings.
- Finish - external metal parts are zinc plated.
Capacity up to 1,400 pounds per caster.
Model 14 is a cold forged caster with a larger swivel bearing and center pin than Model 9. It can be used for up to 1400 lbs per caster on manually moved equipment. If these casters are going to be moved by mechanically powered equipment consult us first.
| You
should NEVER select on the basis of load capacity alone. If you have any doubt
as to which wheel or caster is the BEST choice for your application contact us
for a recommendation. CALL US AT 800-501-3808 |
Optional Features
Swivel Lock
Welded Swivel Lock
SL4 -
Locks Swivel, NOT wheel.
Wheel Brakes
Side Lock Brake
TB - Pedal
on side of Wheel
Locks ONLY the wheel from rolling.
Wheel Brakes are
not designed
to hold on inclines.
Face Contact Brake
FCB - Locks ONLY the wheel from rolling.
Wheel Brakes are not designed to
hold on inclines.
Not available on V-Groove Wheels.
Press the buttons below to see that wheel in the caster for more information and to order.
Polyolefin
Wheels
Capacities to 700 lbs
Phenolic
Wheels
Capacities to 1400 lbs
Green Polyurethane on
Iron Wheels
Capacities to 1200 lbs
Crown Polyurethane
on Iron Wheels
Capacities to 1400 lbs
Ductile Steel
Wheels
Capacities to 1400 lbs