Elite Metal Hooded Single Wheel Caster This caster will work well on short pile carpet. It will not mark or scratch any hardwood floors. Recommended for short pile carpet or for any hard floor surface: hardwood, ceramic tile, marble, cement, extra thick plastic mats. When used on carpets, normal carpet wear can be expected. Designed for frequent movement on an Executive or Clerical chair. Grip Ring Stem size is 7/16" Diameter x 7/8" Long. The Polyurethane Wheel and Crown Tread on the wheels enhance the ability to swivel or change direction. Precision sealed ball bearing in the wheel provides easy rolling and never needs maintenance. The swivel bearing has two heat treated raceways for easy swiveling and long caster life. Bright chrome finish gives a clean, elegant appearance.
Black Nylon Hooded Twin Wheel Caster The Black Hooded Twin Wheel Caster is available with 50mm Polyurethane Wheels. This caster will work well on either hard floor surfaces or short pile carpet. It will not mark or scratch any hardwood floors. When used on carpets, normal carpet wear can be expected. Polyurethane will not mark or scratch hard floor surfaces. Nylon Body - Hooded - Choice of mountings - Grip Neck Stem & Grip Ring Stem are available with or without a socket. Available with 50mm wheels only - Color: Flat Black ( Only )
Plastic Sockets for Grip Neck Stem | |||
Round Sockets | Square Sockets | ||
Inside Diameter of
Tubing ( I.D. ) |
Inside Diameter of Tubing ( I.D. ) |
||
.433" Diam. | .495" Diam. | .678" Sq. | |
.620" Diam. | .652" Diam. | .880" Sq. |
Plastic Sockets for Grip Ring Stem | |||
Round Sockets | Square Sockets | ||
Inside Diameter of
Tubing ( I.D. ) |
Inside Diameter of Tubing ( I.D. ) |
||
.805" Diam. | .870" Diam. | .870" Square | |
.902" Diam. | .992" Diam. | .902" Square |
Metal Socket with Teeth for use with Grip Neck Stem
Attach caster by drilling a 3/8" x 1 5/8" hole. Install socket, then insert caster.
Part Number
MS-2719
Metal Socket with Teeth
Metal Socket for use
with Grip Neck Stem
Commonly called a "Caster Clip", this socket is
designed to install casters on the edge of 3/4"
Particle Board, MDF or similar sheet goods. Attach caster by
drilling a 3/8" x 1 5/8" hole. Install socket, then insert caster. You may want
to "drill & tack nail" the bottom face or add some silicon sealer to the
hole when installing.
Part Number CC34 - Y =
3/4"
Metal Socket for use
with Grip Ring Stem
This socket is used to
install casters with a 7/16" Diameter Grip Ring Stem on WOOD
furniture.
To attach, drill a 5/8" x 1 1/2" hole. Insert socket
and attach with 1/4" wood screws ( Not supplied ). Insert caster into
socket.
Part
Number MS-2255
Sombrero Socket
Metal Socket for use
with Grip Ring Stem
This socket is used to install casters with a 7/16"
Diameter Grip Ring Stem on WOOD or Steel furniture. The Tack
Plate Diameter is approx 1" and the overall length is 1.46"
To attach in
wood, drill a 5/8" x 1 1/2" hole. Apply Epoxy Glue** ( Not supplied ) to socket
and insert into hole. Allow to harden before inserting caster into socket. (
This socket is not plated and can also be welded to steel. )
Part
Number MS-S10X
** Use a 2
part Epoxy available at Home Depot, Lowes or any Hardware Store.
Metal Socket for use
with Grip Ring Stem
This socket is used to install casters with a 7/16"
Diameter Grip Ring Stem on WOOD furniture.
Attach to inside of frame with wood screws
( Not supplied ). Insert caster into socket.
Part
Number MB180
Straight Bracket
Metal Socket for use with Grip Ring Stem
This socket is used to install casters with a 7/16" Diameter Grip Ring Stem on WOOD furniture.
Attach to inside corner of frame with wood screws
( Not supplied ). Insert caster into socket.
Part Number MB90
Corner
Bracket